Thursday 9 February 2017

smartDIS

DIS is a USER PROGRAMMABLE Door Interlock System, This system is designed to suit modern door interlocking requirements. DIS can also be interface with any access controller. DIS has Master-Slave Configuration and can be configured to total 8 doors in one loop.

The unit is flexible and can be configured on site by the user for required door locking logic.
Key Features

  • Master & Slave Configuration (Max. 8 Doors can be controlled).

  • Can be interfaced with any access controller.

  • Door Plate with 2 LEDs to indicate Status of the door (Door Release, Door Locked).

  • Programmable Interlock Logic using an External Keypad for Onsite Programming.

  • Buzzer O/p for DOTL, Door Force Open and emergency, fire alarms.

  • Integration with Fire panel.


For Technical Specifications, please visit our website www.smartisystems.com 

Thursday 22 December 2016

4 Door 4 Reader Access Controller

Add caption

smartXS NG plus is a premium category 4 Door 4 Reader Access Controller, as fast and as efficient in all functions as the best in the market in this category. Better in fact, in some ways.



Key Features & Benefits

  • The Processor:- Its 32 bit processor make smartXS NG plus a much faster and more efficient controller in all its functions at par with the other controllers in the premium category. Much more cost effective too. 
  • MODBUS:- smartXS NG plus has MODBUS connectivity option for integration with third party BMS (Building Management System).
  • SNMP alerts:- SNMP alerts for integration with IT System Administration Software for monitoring critical events i.e.; Door left open, unauthorized access attempt, power fail and battery low alerts, etc... 
  • Alarm Management Software Module:- CCTV/IP Camera integration with Access Events for security audit or to verify/identify tailgating, made effective by Alert based network protocol.
  • Power fail and Battery low alerts:- Alert is sent to admin for power management/arrangement in the Battery Low situations which helps in implementing the utility of both the lock conditions, 'Fail Safe' as well as 'Fail Secure'.
  • Inbuilt Web Server:- smartXS NG plus can be managed remotely through inbuilt web Server using any web browser.
  • 4 GB SD Memory Card:- Mirror image of device configuration and data.
  • Door Interlocking:- smartXS NG plus has inbuilt configurable door interlocking facility for clean environment so vital in sectors such as pharma, datacentre, etc.. 
For more details call on +91-22-65666555 or drop an email on enquiry@smartisystems.com or visit us @ www.smartisystems.com/smartXS-NG-plus.html 

Tuesday 22 November 2016

smart-i offers a full basket of Solutions for Data Centers and Server rooms!!!

Full Basket of Solutions for Data Centers and Server Rooms


Access Control Solutions

  • For individual Racks and Rack Doors, smartRACK – a 1U Unit with complete rack automation for:- 
    • a) Access Control of the Rack and Rack Doors, 
    • b) Temperature and Humidity monitoring with alarms, 
    • c) PDU Power Monitoring, 
    • d) Smoke Detection and monitoring with alarms and 
    • e) Water Leakage monitoring also with alarms.
  • Standalone for Individual Racks, smartBIO, a standalone Biometric + Card access controller for controlling the Front and Rear Doors of a Rack. Besides access control it has an added feature to monitor the Temperature of the Cold and Hot Aisles, with alarms.
  • For Multiple Racks and Rack Doors collectively in Aisles and Containment areas, smartAISLE - This solution automates a Containment area or an aisle of 8 / 16 Racks for:- 
    • a) Multidrop Access control of Racks and Rack Doors, 
    • b) Temperature + Humidity monitoring with alarms, 
    • c) PDU Power Monitoring, 
    • d) Smoke Detection alarm and 
    • e) Water leakage alarm.
  • For the Main and other Critical Doors. Access Control (with an inbuilt Door Interlocking System) at the Main Door as well as any other Critical Doors anywhere in the Data Center.
Monitoring Solutions
  • Power Consumption Monitoring smartDC - Plus for Power Consumption Monitoring and Data Logging for rack level PDU to help: 
    • a) Optimise Power Consumption and 
    • b) Minimise Power Factor Penalties.
  • Environmental Monitoring smartDC - Plus Wireless monitoring of the Temperature and Humidity, with alarms, at various locations in the DC hall including that in the area near the server aisles.
  • Water Leakage Monitoring. Alarm in the case of water leakage under the raised flooring of the Data Center.
  • Safety and security Monitoring. 
    • Rack level Centralised Smoke Detection and Alarm.
    • Pressure Monitoring of the Gas Cylinder, with alarms.
    • Intrusion Detection and Alarms.
    • CCTV integration with various Security Events e.g. Access Control, Intrusion etc. Useful for Security Audits.
  • For a Clean Room environment in the DC Hall. 
    • a) Differential Pressure Monitoring System with alarms and 
    • b) Door Interlocking System between the Hall and Corridor. To ensure a dust free atmosphere inside.
  • smartDMS- Datacenter Monitoring Software (DMS) 
    • a) eSurveillance 
    • b) MODBUS integration for integration with BMS 
    • c) SNMP alerts for Critical alarms on System administration Software 
    • d) Dashboard for quick Alarm Monitoring 
    • e) MIS Reports for various Parameters and Filters for Analysis and Action. 
    • f) Email and SMS alerts.

For more Detials: https://youtu.be/YqTkccXyEfU or write us on enquiry@smartisystems.com

Friday 14 October 2016

The Integrated ATM Monitoring Panel

Integrated Monitoring and Alarm Panel, with our CMS software (smartCMS)

Integrated Monitoring and Alarm Panel, with our CMS software (smartCMS)
Due to our extensive experience over the years in TCP/IP communication and through continuous in house R & D, our ATM Monitoring & Alarm Panel can efficiently communicate with your CMS software. We also offer the
option of our own CMS Software, designed by us specifically for the Indian environment.

Key Benefits

  • Multilayer Security and Utility Monitoring:- For an efficient ATM site multilayer security management, the panel integrates several vital function such as:-

    • Integration with CMS
    • Intrusion Detection with Multiple Alarm
    • Access Control
    • CCTV to facilitate Investigation
    • Power Management
    • Diesel Generator Monitoring

  • Multiple Alarms:- To help ensure that an intrusion event is noticed Real Time, the smart-i ATM Alarm Panel sets off multiple alarms:

    • A loud hooter onsite
    • An audible Alarm in the Central Monitoring Room
    • An alert on the CMS Screen

  • Real Time Response:- smartCMS facilitates a “Real Time Response” during and after an event. Complete 2 way interactive communications between CMS and ATM site during an event. Ticket based Standard Operating Procedure can be initiated after an event.

  • CMS with Multilevel MIS:- The smart-i CMS software with cloud based structure allows both, the service provider of the Control Room as well as the Bank to access its own MIS Reports for analysis. It also allows the Bank to build Zonal Multilocation CMS infrastructure that may be required by them for their regional ATM clusters.

  • Continuous Self Diagnosis:- The system does a continuous self check to ensure it that all its functions are operational including continuity of communication between the ATM Site & the Central Monitoring Room.

For more Details visit us @ http://smartisystems.com/smartATM.html or call us on +91-22-65666555 or drop us an email on enquiry@smartisystems.com 

Tuesday 2 August 2016

Smart Card Based Time Attendance Solution




smartSINGLE NG, the Card based Time and Attendance System, witha 32 Bit Processor, is very fast and efficient in all processing and communication functions, faster than any other in its category, making it an ideal option for any organisation with a fairly large or very large number of employees as well as for schools. Besides this, it also offers several other advantages in support. 





Key Features

  • A Stand Alone Single Door Attendance Terminal & Access Control:- smartSINGLE NG simultaneously provides Access Control as well as for a Single Door.

  • Most efficient Push Mechanism, for Multi Location Application:- To Push data from Multiple Locations to the central location almost in real time.

  • Real Time Resource Management through GPRS:- With the help of the staff attendance, recorded as early as in the staff bus itself, and reported through GPRS in real time, resources can be organized and managed for the day well in time.

  • Attendance and Security for Children travelling by school:- smartSINGLE NG records attendance of pupils in the school buses and communicates the same to the mobile DVR in the bus, to be forward it to the server in the central location in the school via GPRS.

  • POE for Minimum Cabling:- With Power on Ethernet, there is no need to have a separate power connection.

Tuesday 19 July 2016

ATM Panel Monitoring

Integrated Monitoring and Alarm Panel, with our CMS software (smartCMS)
Integrated Monitoring and Alarm Panel, with our CMS software (smartCMS)

Due to our extensive experience over the years in TCP/IP communication and through continuous in house R & D, our ATM Monitoring & Alarm Panel can efficiently communicate with your CMS software. We also offer the option of our own CMS Software, designed by us specifically for the Indian environment.

Key Benefits

  • Multilayer Security and Utility Monitoring:- For an efficient ATM site multilayer security management, the panel integrates several vital function such as:-
    1. Integration with CMS
    2. Intrusion Detection with Multiple Alarm
    3. Access Control
    4. CCTV to facilitate Investigation
    5. Power Management
    6. Diesel Generator Monitoring

  • Multiple Alarms:- To help ensure that an intrusion event is noticed Real Time, the smart-i ATM Alarm Panel sets off multiple alarms:
    1. A loud hooter onsite
    2. An audible Alarm in the Central Monitoring Room
    3. An alert on the CMS Screen
  • Real Time Response:- smartCMS facilitates a “Real Time Response” during and after an event. Complete 2 way interactive communications between CMS and ATM site during an event. Ticket based Standard Operating Procedure can be initiated after an event.

  • CMS with Multilevel MIS:- The smart-i CMS software with cloud based structure allows both, the service provider of the Control Room as well as the Bank to access its own MIS Reports for analysis. It also allows the Bank to build Zonal Multilocation CMS infrastructure that may be required by them for their regional ATM clusters.

  • Continuous Self Diagnosis:- The system does a continuous self check to ensure it that all its functions are operational including continuity of communication between the ATM Site & the Central Monitoring Room.

Thursday 14 July 2016

Biometric System| Biometric Attendance System, Biometric Access Control System, Fingerprints Time and Attendance System

Biometric Attendance System



For Multi Location Attendance Management from Central location of Retail Chains and Branches

The requirements of Multilocation Attendance Management are different from those of single location attendance management. smart-i BIOlite NG has been specifically designed to address these special needs.






Key Features & Benefits

  • Multilocation Centralised Attendance Management:- Accurate monitoring of attendance, simultaneously at hundreds of outlets in the Retail Chain, or multiple branches such as those of banks, with relevant checks and analysis, is possible with the smart-i Multilocation Attendance Management Software.

  • Push Data Mechanism:- To download data frommultiple locations to the central server.

  • Useful MIS:- Wealth of MIS reports for Audit and Analysis, Periodical as well as Real Time, are available on Private and Public Cloud to the management.

  • Complete online Attendance Management:- Online Attendance/Leave/Shift management and checks from anywhere/anytime.